BQJTC - AWA HEAT WELD
- MSDS: BQJTC
- Manufacturer: TAMKO ASPHALT PRODUCTS INC
- Product Name: AWA HEAT WELD
- National Stock Number: 5610-00F026665
Product Identification
Product ID:AWA HEAT WELD
MSDS Date:11/22/1989
FSC:5610
NIIN:00F026665
MSDS Number: BQJTC
Responsible Party
JOPLIN, MO 64801-1935
US
Emergency Phone: 412-624-6644
Info Phone: 412-624-6644
Preparer: CHARLES W HARPER
Cage: 95298
Contractor
Telephone: 412-624-6644
Cage: 95298
Ingredients
ASPHALT FUMES, ASPHALT, CUTBACK ASPHALT
CAS: 8052-42-4
RTECS: CI9900000
Fraction By Weight: 40-55%
ACGIH TLV: 5 MG/CUM
1,3-BUTADIENE POLYMER, STYRENE-BUTADIENE POLYMER, SBS, SBS
CAS: 9003-55-8
RTECS: WL6478000
Fraction By Weight: 10-20%
NEPHELINE SYENITE BASED COLORED GRANULES
Fraction By Weight: 20-30%
SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: <10%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
SLAG
Fraction By Weight: <10%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NAUSEA &/OR DIZZINESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: DERMATITIS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER UNTIL
PARTICLES ARE REMOVED. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:COC
Flash Point:>550F
Extinguishing Media:WATER, WATER FOG, DRY CHEMICALS, FOAM, CO2
Handling
Handling and Storage Precautions:AVOID SPLATTER OR OTHER CONTACT
W/MOLTEN MATERIAL GENERATED DURING HEAT WELD APPLICATION.
Exposure Controls
Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR W/ORGANIC VAPOR
CARTRIDGE.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:NORMAL PERSONAL HYGIENE
Supplemental Safety and Health
ASPHAULT FUMES MAY CONTAIN SMALL TRACES OF POLYAROMATIC HYDROCARBONS.
Chemical Properties
Boiling Pt:B.P. Text:>550F
Melt/Freeze Pt:M.P/F.P Text:>300F
Vapor Pres:NEGLIGIBLE
Spec Gravity:0.98-1.05
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN TO BLACK SEMI-SOLID W/PETROLEUM ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:INHALATION OF FUMES GENERATED DURING HEAT
WELDING APPLICATION.
Hazardous Decomposition Products:CO2, CO, ALDEHYDES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. MUNICIPAL OR INDUSTRIAL LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.